Overview
Wing and control surface wiring spans long runs through fuel-adjacent, high-flex zones, connecting flight control actuators, lighting, and ice protection systems along the wingspan.

Design & Construction
Long-Run, Low-Weight Cable Architecture
Lightweight, low-diameter cable minimizes added wing weight across long spanwise runs while maintaining full signal and power integrity to wingtip systems.
Flex-Rated Control Surface Wiring
Flex-rated conductors at aileron, flap, and spoiler hinge points withstand continuous control surface articulation throughout the aircraft’s flight envelope.
Manufacturing Process
Built under AS9100D quality management with full first-article inspection and lot traceability, supporting airframe OEMs and MRO providers on wing structure and control surface programs.

Typical Applications
- Aileron and flap actuator wiring
- Wingtip navigation light cabling
- Wing ice protection system harnesses
- Fuel tank sensor interconnects along the wing
- Spoiler control wiring
Common installations include Aileron and flap actuator wiring, Wingtip navigation light cabling, and Wing ice protection system harnesses, where flight-critical reliability and stringent weight optimization are the primary design drivers. The same base design can also be adapted for Fuel tank sensor interconnects along the wing and Spoiler control wiring with minor changes to connector type or cable length.
Technical Specifications
Standard configurations are available with the following technical specifications; custom configurations outside these ranges can be discussed with our engineering team. Wire Gauge: AWG 26 – 14. Conductor Count: 4 – 44 circuits. Insulation: Lightweight, high-temp fluoropolymer. Temp Range: -55°C to +200°C. Flex Life: Rated for continuous control surface articulation. Weight: Optimized low-diameter, low-weight build. Connector Standard: MIL-spec circular, vibration rated.
Quality & Certification
Manufactured under AS9100D and ISO 9001 certification, with flex-cycle validation matched to control surface articulation requirements.
Customization & Lead Time
Standard lead time for the Aircraft Wing & Flight Surface Wiring Harness is 6–8 weeks prototype, 3–4 weeks production reorder. Connector type, cable length, and conductor configuration can be customized to match your exact application, including MIL-spec connector alternatives and shielding options for specific avionics or airframe integration requirements. Contact our engineering team with your drawings or requirements for a project-specific quote.
Why XinHarness
Wing and flight surface harnesses run on the same AS9100D-certified lines as our cabin and engine programs, giving airframe integrators a single certified source. See the Aerospace industry page, or request a quote for your project. For related technical background, see our article on the impact of extreme temperatures on wire harness performance.
Frequently Asked Questions
All aerospace harnesses, including the Aircraft Wing & Flight Surface Wiring Harness, are manufactured under AS9100D quality management and can be built to MIL-DTL-27500 wire and connector specifications on request.
Every Aircraft Wing & Flight Surface Wiring Harness unit undergoes continuity, insulation resistance, and dielectric withstand testing, with additional environmental and vibration testing available for flight-critical applications.
Yes. Connector types, wire gauge, shielding, and routing length can all be customized to match your specific airframe and installation requirements — contact our engineering team with your drawings or specifications.


