XinHarness manufactures corrosion-resistant wire harnesses and cable assemblies for marine, offshore, and subsea applications. DNV GL-approved constructions withstand salt spray, UV exposure, and continuous immersion.
Key technical challenges in Marine wire harness manufacturing — and how XinHarness addresses them.
Salt water and humid marine air accelerate corrosion. We use tinned-copper conductors and marine-grade jacketing validated to 1000+ hours of ASTM B117 salt-spray testing.
Deck and below-deck equipment require reliable sealing against water ingress. Our connectors and cable glands are rated IP67 to IP68 for continuous wet-environment exposure.
Above-deck cables face constant UV and ozone exposure. We specify UV-stabilized, ozone-resistant jacketing compounds that resist cracking and embrittlement over multi-year service life.
Marine cabling must meet IEC 60092 flame-retardant and low-smoke requirements for vessel safety. All constructions are tested for flame propagation and smoke density compliance.
Bridge instrument harness, radar and GPS cabling, navigation light wiring
Engine control harness, thruster wiring, propulsion sensor cables
Platform power distribution, control system harness, instrumentation cables
Yacht wiring harness, cabin electrical systems, marine electronics cables
Cargo ship harness, ballast control wiring, deck equipment cables
Subsea umbilical cables, ROV harness, pressure-rated connector assemblies
| Voltage Rating | 12V – 690V AC/DC |
| Wire Gauge | 0.5 – 95 mm² |
| IP Rating | IP67 – IP68 |
| Salt Spray Resistance | 1000+ hours per ASTM B117 |
| Standards | IEC 60092, DNV GL Type Approval |
| Testing | 100% continuity + hi-pot + IP ingress test |
Describe your requirements and receive a detailed technical response within 24 hours.
Our Marine Division specifies corrosion-resistant materials and DNV GL-approved constructions as standard, supporting shipbuilders, offshore platform operators, and marine electronics OEMs with harnesses built for decades of service in harsh marine environments.
About XinHarnessYes. Our marine cable assemblies are manufactured to constructions with DNV GL Type Approval documentation available for vessel classification requirements.
Yes. We use tinned-copper conductors and marine jacketing validated to 1000+ hours of ASTM B117 salt-spray testing, with IP68-rated sealed connectors for submerged applications.
Yes. We offer potted, overmolded, and mechanically sealed connector options rated for offshore and subsea environments upon request.
IP67 and IP68-rated waterproof connectors are standard for marine assemblies, with submersible-rated options available for below-waterline or bilge installations.
Yes. Provide your vessel drawings or routing requirements and we will build to the exact lengths and connector orientations your installation needs.
Marine
Overview Propulsion and thruster systems demand high-current power delivery alongside precise control signaling, all within a wet, corrosive engine room and stern-tube environment. Marine Propulsion & Thruster Control…
Marine
Heat- and oil-resistant power distribution harnesses for marine engine rooms, ISO 9001 manufactured with corrosion-resistant conductors.
Marine
Overview Marine lighting and distribution panels tie together dozens of circuits across a vessel's electrical system, requiring wiring that resists moisture and vibration while staying easy to trace…
Marine
<p>IP68-rated cable assemblies for deck winches, capstans, and topside control equipment, built with tinned copper conductors for continuous saltwater exposure.</p>
Marine
IP68-rated marine wiring harnesses with tinned copper conductors and salt-fog-tested materials for shipboard and offshore use.
Marine
Overview Communication and navigation antennas run long cable paths between exposed mast-top locations and below-deck electronics, demanding low-loss signal performance alongside full marine environmental protection. Marine Communication and…
Submit your drawings or specifications. Our engineers will respond with a technical review and competitive quote within 24 hours.
