Overview
Infusion pumps and bedside monitors are handled constantly — connected, disconnected, and routed around beds and carts many times a day — so cable assemblies need connector retention and jacket durability that hold up under real clinical use, not just lab testing.
Design & Construction
Strain-Relieved Connector Zones
Overmolded and boot-reinforced connector transitions reduce conductor fatigue at the points where cables are gripped and flexed most during bedside handling.
Biocompatible, Cleaning-Resistant Jacketing
Jacket materials are selected to withstand hospital-grade disinfectants and repeated wipe-downs without cracking, with biocompatibility data available per ISO 10993.
Manufacturing Process
Assembled in an ISO Class 100,000 (ISO 8) cleanroom under ISO 13485 quality controls, with full material lot traceability from incoming wire to finished assembly.
Typical Applications
- Infusion and syringe pump cabling
- Bedside patient monitor leads and interconnects
- Vital-signs sensor cable assemblies
- Medical cart and workstation power cabling
- Nurse call and alarm signal cabling
Common installations include Infusion and syringe pump cabling, Bedside patient monitor leads and interconnects, and Vital-signs sensor cable assemblies, where biocompatibility, electrical safety, and continuous fail-safe operation are the primary design drivers. The same base design can also be adapted for Medical cart and workstation power cabling and Nurse call and alarm signal cabling with minor changes to connector type or cable length.
Technical Specifications
Standard configurations are available with the following technical specifications; custom configurations outside these ranges can be discussed with our engineering team. Wire Gauge: AWG 32 – 20. Conductor Count: 2 – 24 conductors. Insulation: PVC / Silicone (biocompatible options). Temp Range: -10°C to +90°C. Voltage Rating: Up to 60V DC (isolated circuits available). Flex Rating: Rated for repeated bedside handling and cart routing. Cleanroom: ISO Class 100,000 (ISO 8).
Quality & Certification
Manufactured under ISO 13485 certification with 100% continuity and pull-test verification, and full documentation packages available for regulatory submissions.
Customization & Lead Time
Standard lead time for the Infusion Pump & Patient Monitor Cable Assemblies is 4–6 weeks prototype, 2–3 weeks production. Connector type, cable length, and conductor configuration can be customized to match your exact application, including connector type, cable length, and sterilization compatibility to match your device’s specific design requirements. Contact our engineering team with your drawings or requirements for a project-specific quote.
Why XinHarness
The same cleanroom line and traceability system used for our diagnostic and surgical cable programs supports infusion pump and monitor OEMs from prototype through volume production. See the Medical industry page, or request a quote for your project. For related technical background, see our article on the role of potting and conformal coating in wire harnesses.
Frequently Asked Questions
Medical assemblies including the Infusion Pump & Patient Monitor Cable Assemblies are manufactured under ISO 13485 quality management for medical device manufacturing.
Yes, biocompatible and autoclave-sterilizable materials are available depending on the application and device contact requirements.
Yes, connector type, cable length, shielding, and sterilization compatibility can all be tailored to your specific medical device requirements — share your design specifications for a custom quote.
