Overview
MRI and imaging coil cabling must transmit sensitive RF signals while remaining safe within powerful magnetic fields, requiring specialized non-ferrous materials and careful shielding design.

Design & Construction
Non-Ferrous, MRI-Safe Construction
Non-ferrous conductors and connector hardware eliminate magnetic interference risk, keeping coil cabling safe for use within the MRI bore.
RF-Shielded Signal Transmission
Precision-shielded coaxial and twisted-pair construction preserves RF signal fidelity between imaging coils and the scanner receiver electronics.
Manufacturing Process
Assembled in an ISO 13485-certified cleanroom environment with 100% signal-integrity testing, supporting MRI coil and imaging accessory OEMs through certification and volume production.

Typical Applications
- MRI receive coil cabling
- RF shielding interconnects
- Imaging table control wiring
- Coil interface panel connectors
- Patient positioning sensor cabling
Common installations include MRI receive coil cabling, RF shielding interconnects, and Imaging table control wiring, where biocompatibility, electrical safety, and continuous fail-safe operation are the primary design drivers. The same base design can also be adapted for Coil interface panel connectors and Patient positioning sensor cabling with minor changes to connector type or cable length.
Technical Specifications
Standard configurations are available with the following technical specifications; custom configurations outside these ranges can be discussed with our engineering team. Wire Gauge: AWG 32 – 24. Conductor Count: Coax and twisted-pair, 4 – 16 circuits. Insulation: Non-ferrous, biocompatible FEP. Temp Range: -20°C to +90°C. Shielding: Precision RF-shielded coax. Material: Fully non-ferrous, MRI-safe. Sterilization: Autoclave and EtO compatible.
Quality & Certification
Manufactured under ISO 13485 and ISO 9001 certification, with non-ferrous material documentation suited to MRI-environment safety requirements.
Customization & Lead Time
Standard lead time for the Medical Imaging Coil & MRI-Compatible Cable Assemblies is 6–8 weeks prototype, 3–4 weeks production reorder. Connector type, cable length, and conductor configuration can be customized to match your exact application, including connector type, cable length, and sterilization compatibility to match your device’s specific design requirements. Contact our engineering team with your drawings or requirements for a project-specific quote.
Why XinHarness
MRI-compatible cabling extends the same micro-coax and shielding expertise from our endoscopy and diagnostic imaging programs to the magnetic-field environment. See the Medical industry page, or request a quote for your project. For related technical background, see our article on the role of potting and conformal coating in wire harnesses.
Frequently Asked Questions
Medical assemblies including the Medical Imaging Coil & MRI-Compatible Cable Assemblies are manufactured under ISO 13485 quality management for medical device manufacturing.
Yes, biocompatible and autoclave-sterilizable materials are available depending on the application and device contact requirements.
Yes, connector type, cable length, shielding, and sterilization compatibility can all be tailored to your specific medical device requirements — share your design specifications for a custom quote.

