Overview
Vessel battery banks and shore power connections manage charging, inversion, and dockside power transfer, requiring cabling engineered for corrosion resistance and strict marine electrical safety standards.

Design & Construction
Corrosion-Resistant Battery Interconnects
Tinned-copper battery cable and marine-grade lugs resist the corrosion common in bilge and engine room battery compartments, maintaining low-resistance connections.
Galvanically Isolated Shore Power Wiring
Isolated shore power cabling protects onboard electrical systems and hull fittings from galvanic corrosion caused by dockside grounding differences.
Manufacturing Process
Built under ISO 9001 process controls with dielectric and continuity testing, supporting marine electrical system integrators across commercial and leisure vessel programs.

Typical Applications
- Battery bank interconnect cabling
- Shore power inlet wiring
- Battery charger and inverter interconnects
- Galvanic isolator wiring
- Battery monitor sensor cabling
Common installations include Battery bank interconnect cabling, Shore power inlet wiring, and Battery charger and inverter interconnects, where corrosion resistance and sealed, submersible-rated protection against saltwater exposure are the primary design drivers. The same base design can also be adapted for Galvanic isolator wiring and Battery monitor sensor cabling with minor changes to connector type or cable length.
Technical Specifications
Standard configurations are available with the following technical specifications; custom configurations outside these ranges can be discussed with our engineering team. Wire Gauge: AWG 8 – 4/0. Conductor Count: 1 – 8 circuits. Insulation: Tinned-copper, marine-grade jacketing. Temp Range: -30°C to +105°C. Voltage Rating: 12V / 24V DC and 120V / 230V AC shore systems. Wiring Standard: ABYC-compliant construction. Corrosion Protection: Galvanic isolation compatible.
Quality & Certification
Manufactured under ISO 9001 certification with ABYC-compliant cable constructions available for marine electrical safety programs.
Customization & Lead Time
Standard lead time for the Marine Battery Bank & Shore Power Wiring Harness is 4–6 weeks prototype, 2–3 weeks production reorder. Connector type, cable length, and conductor configuration can be customized to match your exact application, including connector sealing rating, cable length, and shielding to match your vessel’s specific installation requirements. Contact our engineering team with your drawings or requirements for a project-specific quote.
Why XinHarness
Battery bank and shore power cabling shares the same corrosion-resistant materials used across our engine room and HVAC programs. See the Marine industry page, or request a quote for your project. For related technical background, see our article on how to select the right connectors for waterproof applications.
Frequently Asked Questions
Yes, marine assemblies including the Marine Battery Bank & Shore Power Wiring Harness are built using corrosion-resistant materials and can be configured with IP67/IP68-rated waterproof connectors.
Our marine cable assemblies are manufactured under ISO 9001 quality management and can be built to relevant marine industry standards on request.
Yes, we regularly customize connector types, cable lengths, and routing configurations to match specific vessel layouts and equipment.


